Features

Specification:

Features:

• Self-contained easy to operate trainer. Built in Power Supply
• On board line, terminating resistance and test generators
• Functional blocks indicated on board mimic
•  Exhaustive learning material. Compact size

Object: To measure the following :

1.  Measuring the characteristics of a line
2.  Measuring the attenuation of a line
3. Measuring the Input Impedance of the line
4. Phase displacement between the current & voltage at input of line
5. Frequency characteristic of the line
6. Study of Stationary Waves
7.  Signal phase shift along the line
8.  Fault localization within the line
9. Line under pulsed condition.

Features: The board consists of the following built-in parts :

01. 4 Nos. Coaxial Cables 25 meters each, total Transmission line 100 metres.

02. Two potentiometers for impedance matching (0-100 Ohms).

03. Sine/Square wave Signal Generator having frequency 40KHz to 4MHz, in two bands 40KHz to 400KHz

& 400KHz to 4MHz.

04. A SPDT switch to select either sine or square wave.

05. A SPDT switch to select frequency either high (400KHz to 4MHz) or low (40KHz to 400KHz).

06. A potentiometer to vary frequency high (400KHz to 4MHz) or low (40KHz to 400KHz).

07. A potentiometer to vary amplitude.

08. BNC connector to connect input.

09. Adequate no. of other electronic components.

10. Mains ON/OFF switch, fuse and jewel light.

11. Interconnections: 2 mm Banana sockets, Test Points: 10

12. The unit is operative on 230V ±10% at 50/60Hz A.C. Mains. Power Consumption: 3 VA approximately

Weight: 5.5 Kg. approximately, Dimensions (mm): W 450 x H 113 x D 280

Package contains: BNC to BNC Cable: 1 no., BNC to Test Prod Cable: 1 no., Patch Cord 16": 14 nos.

Mains cord: 1 no.

Other Apparatus Required: Oscilloscope / Cathode Ray Oscilloscope 20MHz (Out of Scope).

 (Assembled by ATCL, Bangladesh).